by Ted Smith » Wed Jun 26, 2013 4:42 pm
The photos tonight cover both Antonito and Chama where work on projects is going full speed ahead! The ridge-capping is completed on the Antonito Car Shelter Project, and Team Leader Jim Florey's crew is now working on the fabrication of the sign standards for the Osier interpretive signage project. Don Stewart's dedicated painting crew has been seen in Chama, at Osier and in Antonito, working from dawn to dusk. And excellent progress is reported on the Chama projects, especially those which are in direct support of the railroad: three stock cars, as well as the Cinder Bear rider gondola!
Friends' President Tim Tennant and four Friends' Board members attended the C&TSRR Commission meeting held today in Conejos. After the meeting, they toured the Antonito Car Restoration Facility with C&TSRR President John Bush, who was briefed on the projects now underway. It is an impressive list!.
- Attachments
-
- Bill Pratt briefs C&TSRR President John Bush and Friends' President Tim Tennant on the rebuilding of Gondola 783. This is a project which is in direct support of C&TSRR operations..jpg (331.34 KiB) Viewed 2771 times
-
- Board Member Bob Ross, Friends' President Tim Tennant, C&TSRR President John Bush and Board Chairman Craig McMullen visit the Antonito CRF to update John on the projects now in progress..jpg (284.97 KiB) Viewed 2771 times
-
- Friends' Board Member Maureen Gonzales, Tim Tennant and Chronicler Tim Smith discuss the restoration of Cook Car 053.
- Board Member Maureen Gonzales, Friends' President Tim Tennant and Chronicler Tim Smith are briefed on the restoration of Cook Car 053 at the Antonito CRF..jpg (252.84 KiB) Viewed 2771 times
-
- Team Leader Jim Florey's crew is tackling the fabrication of sign standards for the Osier interpretive signage project now that they have completed their work on the car shelter roof!.jpg (264.29 KiB) Viewed 2771 times
-
- The newly roofed Antonito Car Shelter Facility has been completely ridge-capped..jpg (372.02 KiB) Viewed 2771 times
-
- This photo shows the inside of the tool room in the CRF; volunteers are getting this better organized!
-
- The Oak flooring going down in the RPO car, located in Chama, will be completed by the end of this work session. Obviously, there will be some needed trim work done in a later session!
-
- The top of this photo shows where a water tank could be placed for a bathroom; it is not yet been decided if the bathroom will be reinstalled.
-
- High-sided Gondola Car #1232 is close to getting a new floor; rubberized membrane (white strips) have been placed on the sills to help slow future deterioration.
-
- The "Cinder Bear" rider gondola has been freshly painted by Team Leader Don Stewart and his energized crew!