Tuesday 7/31/18

Discussion Pertaining to Work Session F - 2018

Tuesday 7/31/18

Unread postby Sharon Evans » Fri Jul 27, 2018 9:47 am

We can see from this capture of the south tipple cam as 216 departs, the paint car 3686 now has its primer paint.
2018-07-31 The 484 gets the 8 car train 216 underway.jpg
2018-07-31 The 484 gets the 8 car train 216 underway.jpg (107.29 KiB) Viewed 3072 times

The paint car 3686
2018-07-31 Brad is spraying the primer on the sides as work on the roof continues.jpg
Brad is spraying the primer on the sides as work on the roof continues

2018-07-31 The doors for the paint car are ready to be primed.jpg
The doors for the paint car are ready to be primed

2018-07-31 Brad has finished the priming.jpg
Brad has finished the priming

2018-07-31 The doors are also primed.jpg
The doors are also primed

Car inspector house at Cumbres Pass
2018-07-31 Work on some outside boards.jpg
Work on some outside boards

2018-07-31 Work on the porch roof at the car inspectors house is ongoing.jpg
Work on the porch roof at the car inspectors house is ongoing

The folks who give us these photographs
2018-07-31 The chornicler crew with Sharon McGee in the middle.jpg
The chronicler crew with Sharon McGee in the middle, Mike Mee on the left and Pat Maufaris on right

.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Tuesday 7/31/18

Unread postby Sharon Evans » Tue Jul 31, 2018 5:32 pm

The conversion of P-box 213 to box car 3476
bandicam 2018-07-31 20-30-13-158.jpg
The work on getting the P-box 213 converted to box car 3476 continues

bandicam 2018-07-31 20-30-07-712.jpg
More tightening on the end sill of the coupler

bandicam 2018-07-31 20-30-04-269.jpg
Getting the bolts on the coupler fittings installed yesterday


.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Tuesday 7/31/18

Unread postby Sharon Evans » Tue Jul 31, 2018 5:53 pm

We have a few from Antonito
The Gramps tank car rebuild
2018-07-31 Working on a new coupler pocket assembly for one of the tank car rebuilds.jpg
Working on a new coupler pocket assembly for one of the tank car rebuilds

2018-07-31 Getting ready to lift the couple pocket assemble into the couple body.jpg
Getting ready to lift the couple pocket assemble into the couple body

Drop bottom gon 731
2018-07-31 Working on getting drop bottom gon 731 tore down to the metal frame.jpg
Working on getting drop bottom gon 731 tore down to the metal frame

2018-07-31 Getting the frame of 731 cleaned up as much as possible before moving it.jpg
Getting the frame of 731 cleaned up as much as possible before moving it

2018-07-31 OK, if everyone would shove equally this may go quicker.jpg
OK, if everyone would shove equally this may go quicker

2018-07-31 Ah, we have gotten the 731 into the house_.jpg
Ah, we have gotten the 731 into the house

2018-07-31 Torching off some bolt heads on 731.jpg
Torching off some bolt heads on 731

2018-07-31 Using a needle scaler on the frame of 731.jpg
Using a needle scaler on the frame of 731

Some blacksmithing
2018-07-31 If you beat hot metal with a seldge it seems to move.jpg
If you beat hot metal with a sledge it seems to move

.
2018-07-31 Think I should hit it again.jpg
Think I should hit it again
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Tuesday 7/31/18

Unread postby John Cole » Tue Jul 31, 2018 9:39 pm

Great photos, LOVE the hard hat bump guards on the outer edge of the drop bottom gon. :smiley24: I think Bill Pratt has the only husband and wife team that work on the same project each summer. Lee and Randy also work together out at OERM on our VC2 steam locomotive, and I believe Lee, Randy, and their son Daniel all operate that locomotive. How neat is that?
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm


Return to Work Session F (July 30 - Aug. 3)

Who is online

Users browsing this forum: No registered users and 0 guests