Thursday 8/2/18

Discussion Pertaining to Work Session F - 2018

Thursday 8/2/18

Unread postby Sharon Evans » Fri Jul 27, 2018 9:47 am

2018-08-02 Its Thursday and the smoke says that all will feast on cook car hamburgers.jpg
2018-08-02 Its Thursday and the smoke says that all will feast on cook car hamburgers.jpg (99.99 KiB) Viewed 5528 times


Antonito:
2018-08-02 OK, here they are all the Antonito crew smiling at us.jpg
OK, here they are all the Antonito crew smiling at us

2018-08-02 No matter where you are and what you are doing, you just cannot get away from the paperwork.jpg
No matter where you are and what you are doing, you just cannot get away from the paperwork

2018-08-02 The frame of the drop bottom gon is getting a red primer coat to protect the metal.jpg
The frame of the drop bottom gon is getting a red primer coat to protect the metal

2018-08-02 OK, it has to be done, but using a needle scaler is no fun work.jpg
OK, it has to be done, but using a needle scaler is no fun work

2018-08-02 Grinding on what I think is a draw bar link.jpg
Grinding on what I think is a draw bar link

2018-08-02 Yes, I know its blurred, but those sparks flying off the grinder are great to see.jpg
Yes, I know its blurred, but those sparks flying off the grinder are great to see




.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Thursday 8/2/18

Unread postby Sharon Evans » Thu Aug 02, 2018 4:53 pm

Chama
Conversion of the P-box 213 to box car 3476
2018-08-02 Sometines it just takes more force to get that old bolt out.jpg
Sometines it just takes more force to get that old bolt out

bandicam 2018-08-02 20-05-48-893.jpg
Drilling through the old end beam to attach a new roof center support

bandicam 2018-08-02 20-05-39-108.jpg
2018-08-02 attaching the center support to a roof cross member

bandicam 2018-08-02 20-05-57-750.jpg
The roof is now going on with the supports in place

bandicam 2018-08-02 20-05-44-195.jpg
2018-08-02 Clamps are in place on the old member so it can be stablized

bandicam 2018-08-02 20-05-53-575.jpg
2018-08-02 Putting on the sealant to help this old wood stablize

bandicam 2018-08-02 20-05-46-519.jpg
2018-08-02 Cutting the tongue and grove boards for the inside of the conversion

bandicam 2018-08-02 20-05-52-277.jpg
2018-08-02 Here we can see some of the inside sheathing in place as they lever in some floor boards

bandicam 2018-08-02 20-05-59-973.jpg
2018-08-02 Wood filler has been used to make this old wood level


.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Thursday 8/2/18

Unread postby Sharon Evans » Thu Aug 02, 2018 5:25 pm

Chama
Paint car 3686
2018-08-02 Getting the roof walks mounted on the paint car.jpg
Getting the roof walks mounted on the paint car

2018-08-02 Drilling holes in the door hardware for the paint car.jpg
Drilling holes in the door hardware for the paint car

2018-08-02 Mounting the top guide rail for the door.jpg
Mounting the top guide rail for the door

2018-08-02 OK, everyone lift on 3.jpg
OK, everyone lift on 3

2018-08-02 The door is up and on the guide.jpg
The door is up and on the guide

2018-08-02 The second door on the paint car is mounted.jpg
The second door on the paint car is mounted

2018-08-02 The small end door used to give ventiluation is now on.jpg
The small end door used to give ventiluation is now on

It seems like a nice day for a speeder ride.
2018-08-02 Looks like Brad and a helper are getting a speeder ride.jpg
Looks like Brad and a helper are getting a speeder ride

2018-08-02 They have ended up at Labato bridge doing some measurements.jpg
They have ended up at Labato bridge doing some measurements

One for Cumbres and the Car inspectors house
.
2018-08-02 The porch roof at the car inspectors house is getting tar paper over the finished boards.jpg
The porch roof at the car inspectors house is getting tar paper over the finished boards
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Thursday 8/2/18

Unread postby John Cole » Thu Aug 02, 2018 6:32 pm

I talked to Brad, and he says they were treating the wooden walkway with boiled lindseed oil for a wood preservative. He said they finished early, so he walked down to Wolf creek. He said the view of the trestle was great, but walking back up was tough on an old guy at 8,000 feet.
Last edited by John Cole on Fri Aug 03, 2018 8:39 am, edited 1 time in total.
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: Thursday 8/2/18

Unread postby Sharon Evans » Fri Aug 03, 2018 5:12 am

Thanks John for letting us know what Brad was doing out at Labato.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Thursday 8/2/18

Unread postby John Cole » Sun Aug 12, 2018 8:55 pm

Please remember to click on each photo as they show up cropped when you are scrolling down, when you click on the photo you will get the extra 25% of the photo missing.
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm


Return to Work Session F (July 30 - Aug. 3)

Who is online

Users browsing this forum: No registered users and 0 guests