Coaling in the Yard

Tell us what interesting thing you saw on the web-cams.

Coaling in the Yard

Unread postby Bruce McDowell » Mon May 09, 2016 6:46 am

Can't see a locomotive number yet, but the loaders are cycling through with coal - getting closer!
Attachments
2016-05-09_9-44-23.jpg
2016-05-09_9-44-23.jpg (13.84 KiB) Viewed 6152 times
User avatar
Bruce McDowell
Fireman
Fireman
 
Posts: 131
Joined: Fri May 09, 2014 6:03 am
Location: New Hampshire

Re: Coaling in the Yard

Unread postby Mike Maguire » Mon May 09, 2016 6:58 am

7:55 Loader pushed loco back into the Engine House. Will we see smoke today ?
Mike Maguire
Engineer
Engineer
 
Posts: 289
Joined: Wed May 20, 2015 11:21 am
Location: Newcastle upon Tyne, England

Re: Coaling in the Yard

Unread postby Bruce McDowell » Mon May 09, 2016 7:08 am

Yes - we have smoke!

(Don't blame them at all for pushing back inside to light the fire. Nasty morning in Chama.)
User avatar
Bruce McDowell
Fireman
Fireman
 
Posts: 131
Joined: Fri May 09, 2014 6:03 am
Location: New Hampshire

Re: Coaling in the Yard

Unread postby Edwin Frey » Mon May 09, 2016 7:09 am

:cheers: Yes! There is smoke from the west stall at 8:05!
Mr. Ed
Avid fan of the C&TSRR, garden railroader, general gofer.
Definitely narrow (gauge) minded.
User avatar
Edwin Frey
Engineer
Engineer
 
Posts: 350
Joined: Thu May 02, 2013 9:51 am
Location: Loveland, CO

Re: Coaling in the Yard

Unread postby Larry Sullivan » Mon May 09, 2016 8:15 am

Thanks Bruce, Mike and Edwin for the heads up on the activity, Here is video of the morning activity. Cold looking rain, snow, sleet mix this morning. I'm thinking this is 484, but I've completely lost track of where the locomotives are. I'll be recording through the day in case they decide to come out later.

Larry Sullivan
Conductor
Conductor
 
Posts: 3297
Joined: Sat Jun 01, 2013 12:28 am
Location: Dunnellon, Florida

Re: Coaling in the Yard

Unread postby Mike Maguire » Mon May 09, 2016 8:40 am

Thanks Larry. Never seen two loaders working together before. Maybe it's because it's not a nice day to be outside.
Mike Maguire
Engineer
Engineer
 
Posts: 289
Joined: Wed May 20, 2015 11:21 am
Location: Newcastle upon Tyne, England

Re: Coaling in the Yard

Unread postby Edwin Frey » Mon May 09, 2016 8:51 am

IIRC, each of the locomotives need to be fired up, before full operations, as a part of its annual inspection to make sure that all connections, etc. are steam-tight and appliances such as injectors, air pumps, etc. are functioning properly. After their initial firing, they get cooled down and any necessary adjustments are made before they are turned loose for real work. So, we may or may not see anything shuffling around he yard today, but it won't be long now until we do!
Mr. Ed
Avid fan of the C&TSRR, garden railroader, general gofer.
Definitely narrow (gauge) minded.
User avatar
Edwin Frey
Engineer
Engineer
 
Posts: 350
Joined: Thu May 02, 2013 9:51 am
Location: Loveland, CO

Re: Coaling in the Yard

Unread postby Jonathan Cordova » Mon May 09, 2016 10:58 am

is anyone looking at the Antonito cam there's a train on the crossing
im a friends member and d&s is mostly where my heart is
User avatar
Jonathan Cordova
Engineer
Engineer
 
Posts: 376
Joined: Thu Mar 12, 2015 3:10 pm
Location: albuquerque

Re: Coaling in the Yard

Unread postby Jeff Schrimmer » Mon May 09, 2016 12:58 pm

She's back out! I didn't catch the number.

Jeff
Attachments
5-9.JPG
5-9.JPG (70.86 KiB) Viewed 6039 times
Jeff Schrimmer
Engineer
Engineer
 
Posts: 227
Joined: Tue Jun 30, 2015 12:12 pm

Re: Coaling in the Yard

Unread postby Jonathan Cordova » Mon May 09, 2016 1:18 pm

its 484 489 in in the engine house with her plow on
im a friends member and d&s is mostly where my heart is
User avatar
Jonathan Cordova
Engineer
Engineer
 
Posts: 376
Joined: Thu Mar 12, 2015 3:10 pm
Location: albuquerque

Re: Coaling in the Yard

Unread postby Sharon Evans » Mon May 09, 2016 1:47 pm

Three weeks until opening day and I am listening to the sound of pops going off in the Chama yard. It is nice after the quiet of winter to be hearing live steam locomotives again.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Coaling in the Yard

Unread postby Edwin Frey » Mon May 09, 2016 1:48 pm

I believe that it's #484, resplendent in new paint, but not lettered yet.
Mr. Ed
Avid fan of the C&TSRR, garden railroader, general gofer.
Definitely narrow (gauge) minded.
User avatar
Edwin Frey
Engineer
Engineer
 
Posts: 350
Joined: Thu May 02, 2013 9:51 am
Location: Loveland, CO

Re: Coaling in the Yard

Unread postby Sharon Evans » Mon May 09, 2016 1:51 pm

Would think they need to move to the water plug soon since they must have filled it from a hose while in the hose so they could get a fire going and build pressure. Than we can see if there is a number visible.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Coaling in the Yard

Unread postby Sharon Evans » Mon May 09, 2016 2:15 pm

She is moving on the lead track and no numbering or lettering. From the whistle it's not the 489 unless they swapped out its whistle. Now back in the house.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Coaling in the Yard

Unread postby Jonathan Cordova » Mon May 09, 2016 2:17 pm

and doesn't 489 have a plow like 487
im a friends member and d&s is mostly where my heart is
User avatar
Jonathan Cordova
Engineer
Engineer
 
Posts: 376
Joined: Thu Mar 12, 2015 3:10 pm
Location: albuquerque

Re: Coaling in the Yard

Unread postby Larry Sullivan » Mon May 09, 2016 2:26 pm

Here's a video of the first real motion of the season! Nice to see, and I would agree with it being #484, but can't tell for sure.

Larry Sullivan
Conductor
Conductor
 
Posts: 3297
Joined: Sat Jun 01, 2013 12:28 am
Location: Dunnellon, Florida

Re: Coaling in the Yard

Unread postby Larry Sullivan » Mon May 09, 2016 2:43 pm

Actually upon review they did move down past the tipple earlier as #484 emerged. Sounds like 3 locomotives echoing on here, I had all 3 cams on they get a bit out of sync so sound is a bit weird - I have to knock off a winter long rust, hope you'll forgive the extra noise --- or should I say music to the ears!!!!! :grin:

Larry Sullivan
Conductor
Conductor
 
Posts: 3297
Joined: Sat Jun 01, 2013 12:28 am
Location: Dunnellon, Florida

Re: Coaling in the Yard

Unread postby Larry Gibson » Mon May 09, 2016 3:40 pm

Thanks Larry! I looked in several times today and saw only the Enginehouse smoke. Glad to see the first loco emerge to start the new season!
Larry Gibson- "WYE I might HARP at you? It is only to SPUR you on!!!!!"
User avatar
Larry Gibson
Conductor
Conductor
 
Posts: 1874
Joined: Tue Jan 24, 2012 2:47 pm
Location: Somewhere between the wye.

Re: Coaling in the Yard

Unread postby Mike Maguire » Tue May 10, 2016 4:53 am

Thanks for those Larry - I too missed most of the action.
Mike Maguire
Engineer
Engineer
 
Posts: 289
Joined: Wed May 20, 2015 11:21 am
Location: Newcastle upon Tyne, England

Re: Coaling in the Yard

Unread postby Doug Frederick » Tue May 10, 2016 6:14 am

It -is- the 484, if there was any doubt.
"The Beatings Will Continue Until Morale Improves..."

https://picasaweb.google.com/110183472086414135127
User avatar
Doug Frederick
Engineer
Engineer
 
Posts: 211
Joined: Tue Jun 18, 2013 6:06 am
Location: Chama, NM, as of 1 Jan 2015.

Re: Coaling in the Yard

Unread postby John Cole » Tue May 10, 2016 7:35 am

Hey Popeye, It appears that the 87 is ready in Antonito, 463 & 484 in Chama. Did you see 489 and can tell us how close it is to being ready to roll? Thanks!
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: Coaling in the Yard

Unread postby John Hamman » Tue May 10, 2016 7:45 am

Doug Frederick wrote:It -is- the 484, if there was any doubt.

That was my take too - at least it is the 494's tender - I think I can always tell by placement of the box in the back corner on top of the tender. I do not think there is one there on the 487, 488, or 489, at least not the past few years I have been watching.
John
John Hamman
Engineer
Engineer
 
Posts: 373
Joined: Wed Aug 21, 2013 12:50 pm

Re: Coaling in the Yard

Unread postby Doug Frederick » Tue May 10, 2016 7:57 pm

Jonathan Cordova wrote:is anyone looking at the Antonito cam there's a train on the crossing


19 plowed snow, all the way to Cumbres.
"The Beatings Will Continue Until Morale Improves..."

https://picasaweb.google.com/110183472086414135127
User avatar
Doug Frederick
Engineer
Engineer
 
Posts: 211
Joined: Tue Jun 18, 2013 6:06 am
Location: Chama, NM, as of 1 Jan 2015.

Re: Coaling in the Yard- 484

Unread postby Doug Frederick » Tue May 10, 2016 8:04 pm

20160510_185720.png
20160510_185720.png (447.63 KiB) Viewed 5836 times
"The Beatings Will Continue Until Morale Improves..."

https://picasaweb.google.com/110183472086414135127
User avatar
Doug Frederick
Engineer
Engineer
 
Posts: 211
Joined: Tue Jun 18, 2013 6:06 am
Location: Chama, NM, as of 1 Jan 2015.

Re: Coaling in the Yard

Unread postby Doug Frederick » Wed May 11, 2016 4:27 pm

John Cole wrote:Hey Popeye, It appears that the 87 is ready in Antonito, 463 & 484 in Chama. Did you see 489 and can tell us how close it is to being ready to roll? Thanks!



John, I heard from rumor control that the 89 is waiting on something for the super heater, but is otherwise fairly ready. That is -not- official scuttlebut.
"The Beatings Will Continue Until Morale Improves..."

https://picasaweb.google.com/110183472086414135127
User avatar
Doug Frederick
Engineer
Engineer
 
Posts: 211
Joined: Tue Jun 18, 2013 6:06 am
Location: Chama, NM, as of 1 Jan 2015.

Re: Coaling in the Yard

Unread postby Jonathan Cordova » Wed May 11, 2016 4:31 pm

hey doug i heard 487 is coming down to chama from Antonito with the rest of the coaches and parlor car
im a friends member and d&s is mostly where my heart is
User avatar
Jonathan Cordova
Engineer
Engineer
 
Posts: 376
Joined: Thu Mar 12, 2015 3:10 pm
Location: albuquerque

Re: Coaling in the Yard

Unread postby Doug Frederick » Thu May 12, 2016 5:11 pm

John Cole wrote:Hey Popeye, It appears that the 87 is ready in Antonito, 463 & 484 in Chama. Did you see 489 and can tell us how close it is to being ready to roll? Thanks!


Talked to Avery today, he said they're doing some timing on the valve gear, and it's done except for the polishing.
"The Beatings Will Continue Until Morale Improves..."

https://picasaweb.google.com/110183472086414135127
User avatar
Doug Frederick
Engineer
Engineer
 
Posts: 211
Joined: Tue Jun 18, 2013 6:06 am
Location: Chama, NM, as of 1 Jan 2015.


Return to Web Cameras

Who is online

Users browsing this forum: No registered users and 6 guests