Friends of the Cumbres & Toltec - FriendsOfCumbresToltec.org

A Place for Those Born Too Late...

Skip to content

WORK SESSION A - Sunday, May 25, 2014

Discussion Pertaining to Work Session A - 2014
Post a reply

WORK SESSION A - Sunday, May 25, 2014

Unread postby Linda Smith » Sun May 25, 2014 12:08 pm

Today, we present a round-up of photos taken during the past few days of Work Session A activities. Our volunteers (especially Ed Lowrance) do not take holidays off!

Here is Ed's "potpourri" of photos!
Attachments
Chuck Deuker drilling angle iron brackets which when are bolted to the Car shelter poles with hold the horizontal girts for the sidewall..jpg
Chuck Dueker drills angle iron brackets which will be bolted to the Car Shelter poles and hold the horizontal girts for the sidewalk.
Jack Heierman and Mary Jane Smith.jpg
Mary Jane Smith is loading up Jack Heiermann with some Friends' merchandise. This year's work session T-shirt is red, featuring a Dorman photo of an historic caboose!
Sam Hauck and William Lowes.jpg
No "U" bolts on hand? Friends' members William Lowes and Sam Hauck will make them!
Team Leader Warren Ringer and Bill Kepner figuring the best way to attach metal A frame brackets to DBG 769..jpg
Team Leader Warren Ringer and Bill Kepner figure out the best way to attach metal "A" frame brackets to Drop Bottom Gondola 769
The best way - Weld the brackets in place - Hard to see however the DBG has been watered down and the hose is still in the car!.jpg
The best way? Weld the brackets in place! This is hard to see, however, as the gondola has been watered down and the hose is still in the car.
the inside of DBG 769 is taking shape as final boards are bolted to the A frames. That was tricky - Just ask Tim Bristow and Bill Kepner!.jpg
The inside of Drop Bottom Gondola 769 takes shape as final boards are bolted to the "A" frames. This was tricky -- just ask Tim Bristow and Bill Kepner! Several side posts were faulty. Team Leader Warren Ringer (far right) is handling that while Jack Heiermann will bolt it into place. Tim Bristow's in the middle!
Valley Lowrance is prepping the Frameless tank cars for painting by roughing up any remaining glossy..jpg
Valley Lowrance is prepping the frameless tank cars for painting by roughing up any remaining glossy finish.
Linda Smith
Brakeman
Brakeman
 
Posts: 41
Joined: Mon Nov 28, 2011 3:30 pm
Location: Logandale, Nevada
Top

Re: WORK SESSION A - Sunday, May 25, 2014

Unread postby John Cole » Sun May 25, 2014 12:48 pm

Thanks for the photos of the A-frames installed in the drop bottom gon. My auto shop kids who helped build them will get a kick out of seeing them put to use. Any photos of the finished A-frame?
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm
Top
Post a reply

Return to Work Session A (May 19-23)

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB® Forum Software © phpBB Group