8/1/19 Thursday

Discussion Pertaining to Work Session E - 2019

8/1/19 Thursday

Unread postby Sharon Evans » Mon Jul 29, 2019 12:40 pm

Antonito for Thursday and we begin with Don Anderson's shots.
2019.08.01 Boring in the countersink on the drop bottom gon (1 of 1).jpg
2019.08.01 Boring in the countersink on the drop bottom gon (1 of 1).jpg (86.32 KiB) Viewed 4448 times

2019.08.01 Lunch is served in Antonito (1 of 1).jpg
2019.08.01 Lunch is served in Antonito (1 of 1).jpg (150.44 KiB) Viewed 4448 times

2019.08.01 Working on the new passenger car trucks at CRF (1 of 1).jpg
2019.08.01 Working on the new passenger car trucks at CRF (1 of 1).jpg (126.76 KiB) Viewed 4448 times

2019.08.01 Bending new outside straps for the Gramps tank car (1 of 1).jpg
More on this process from Pat.
2019.08.01 Bending new outside straps for the Gramps tank car (1 of 1).jpg (137.06 KiB) Viewed 4448 times

More Antonito photos done by Pat Maufrais.
2019.08.01 Heating up the angle iron so it can be bent to a right angle (1 of 1).jpg
2019.08.01 Heating up the angle iron so it can be bent to a right angle (1 of 1).jpg (108.98 KiB) Viewed 4447 times

2019.08.01 Three strong men work hard to bend that metal (1 of 1).jpg
2019.08.01 Three strong men work hard to bend that metal (1 of 1).jpg (131.31 KiB) Viewed 4447 times

2019.08.01 Checking to ensure its correct (1 of 1).jpg
2019.08.01 Checking to ensure its correct (1 of 1).jpg (98.11 KiB) Viewed 4447 times

2019.08.01 Final check by placing it over the original (1 of 1).jpg
2019.08.01 Final check by placing it over the original (1 of 1).jpg (80.67 KiB) Viewed 4447 times

2019.08.01 The new one is in place and ready to attach to the frame (1 of 1).jpg
2019.08.01 The new one is in place and ready to attach to the frame (1 of 1).jpg (79.47 KiB) Viewed 4447 times

2019.08.01 Looks like some final adjusting using a hand torch and clamps (1 of 1).jpg
2019.08.01 Looks like some final adjusting using a hand torch and clamps (1 of 1).jpg (76.12 KiB) Viewed 4447 times

2019.08.01 Continued work on the rail on the Gramps tank car (1 of 1).jpg
2019.08.01 Continued work on the rail on the Gramps tank car (1 of 1).jpg (68.71 KiB) Viewed 4447 times

2019.08.01 Boring in the countersink on the drop bottom gon (1 of 1).jpg
2019.08.01 Boring in the countersink on the drop bottom gon (1 of 1).jpg (86.32 KiB) Viewed 4447 times

2019.08.01 Doing some measurements on the drop bottom gon (1 of 1).jpg
2019.08.01 Doing some measurements on the drop bottom gon (1 of 1).jpg (88.43 KiB) Viewed 4447 times

2019.08.01 Lunch is served in Antonito (1 of 1).jpg
2019.08.01 Lunch is served in Antonito (1 of 1).jpg (150.44 KiB) Viewed 4447 times

2019.08.01 Working on the new passenger car trucks at CRF (1 of 1).jpg
2019.08.01 Working on the new passenger car trucks at CRF (1 of 1).jpg (126.76 KiB) Viewed 4447 times

2019.08.01 Putting new roof timbers on the tender of OY (1 of 1).jpg
2019.08.01 Putting new roof timbers on the tender of OY (1 of 1).jpg (83.54 KiB) Viewed 4447 times

2019.08.01 Looks like a threatening sky over these guys attaching the boards (1 of 1).jpg
2019.08.01 Looks like a threatening sky over these guys attaching the boards (1 of 1).jpg (88.85 KiB) Viewed 4447 times

2019.08.01 Pulling the metal off the roof of OY itself (1 of 1).jpg
2019.08.01 Pulling the metal off the roof of OY itself (1 of 1).jpg (75.17 KiB) Viewed 4447 times

2019.08.01 Taking one of the steps apart from the OY (1 of 1).jpg
2019.08.01 Taking one of the steps apart from the OY (1 of 1).jpg (107.96 KiB) Viewed 4445 times

2019.08.01 Priming this metal at CRF (1 of 1).jpg
2019.08.01 Priming this metal at CRF (1 of 1).jpg (106.51 KiB) Viewed 4447 times
.
Last edited by Sharon Evans on Sun Aug 04, 2019 8:38 am, edited 1 time in total.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 8/1/19 Thursday

Unread postby Sharon Evans » Sun Aug 04, 2019 8:26 am

Cumbres Pass work on the car inspectors house.
2019.08.01 The car inspector's house is now gone so foundation work can begin (1 of 1).jpg
2019.08.01 The car inspector's house is now gone so foundation work can begin (1 of 1).jpg (104.35 KiB) Viewed 4447 times

2019.08.01 Using the backhoe to pull up the walkway between the house and out buildings (1 of 1).jpg
2019.08.01 Using the backhoe to pull up the walkway between the house and out buildings (1 of 1).jpg (113.44 KiB) Viewed 4447 times

2019.08.01 The walkway is up and out of the way so clean up can begin (1 of 1).jpg
2019.08.01 The walkway is up and out of the way so clean up can begin (1 of 1).jpg (114.99 KiB) Viewed 4447 times
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 8/1/19 Thursday

Unread postby Sharon Evans » Sun Aug 04, 2019 8:31 am

Chama work on Thursday.
2019.08.01 Interior sheathing work is ongoing inside box car 3476 (1 of 1).jpg
2019.08.01 Interior sheathing work is ongoing inside box car 3476 (1 of 1).jpg (85.05 KiB) Viewed 4445 times

2019.08.01 Two happy Friends inside box car 3476 (1 of 1).jpg
2019.08.01 Two happy Friends inside box car 3476 (1 of 1).jpg (86.7 KiB) Viewed 4445 times

2019.08.01 Painting the cut level on the 483 (1 of 1).jpg
2019.08.01 Painting the cut level on the 483 (1 of 1).jpg (105.01 KiB) Viewed 4445 times

2019.08.01 The 483's engineer side cylinder looks good in new black  (1 of 1).jpg
2019.08.01 The 483's engineer side cylinder looks good in new black (1 of 1).jpg (82.42 KiB) Viewed 4445 times

2019.08.01 The 483's cylinder details (1 of 1).jpg
2019.08.01 The 483's cylinder details (1 of 1).jpg (75.56 KiB) Viewed 4445 times

2019.08.01 Doing priming paint on rider gon 1204 (1 of 1).jpg
2019.08.01 Doing priming paint on rider gon 1204 (1 of 1).jpg (82.38 KiB) Viewed 4445 times

2019.08.01 Painted decking boards are nailed to the 1204 (1 of 1).jpg
2019.08.01 Painted decking boards are nailed to the 1204 (1 of 1).jpg (97.79 KiB) Viewed 4445 times

2019.08.01 In the woodshop they are building new windows for a car (1 of 1).jpg
2019.08.01 In the woodshop they are building new windows for a car (1 of 1).jpg (98.1 KiB) Viewed 4445 times

2019.08.01 Finishing sanding before paint goes on (1 of 1).jpg
2019.08.01 Finishing sanding before paint goes on (1 of 1).jpg (93.14 KiB) Viewed 4445 times




.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 8/1/19 Thursday

Unread postby Craig Kumler » Sun Aug 04, 2019 1:43 pm

Big thank you to all the folks that keep us informed in internet land!
Craig Kumler
Engineer
Engineer
 
Posts: 394
Joined: Mon Nov 28, 2011 4:24 pm
Location: San Jose, Ca.

Re: 8/1/19 Thursday

Unread postby Jason Rose » Fri Aug 16, 2019 7:08 am

I was there this day and managed to get the camera network restored to service. Though, that reprieve proved to be short-lived... unfortunately.

Special thanks to Michael Mee, Craig McMullen, and Bob Reib for making my job a bit easier. I'm pretty sure Michael saved my life and Bob definitely saved my back. Thank you, gents. I owe ya one. :cheers:


Update: the new network gear has been ordered. Tentative plans are coalescing to get this gear installed and restore the cameras before the end of the season. Stay tuned...
Attachments
20190801-RGX-20190801_151440473_HDR.jpg
South Camera chassis taken apart for replacement.
20190801-RGX-20190801_151531988.jpg
Yours truly
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2799
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 8/1/19 Thursday

Unread postby John Cole » Sat Aug 24, 2019 7:34 am

You really picked a great spot to locate those cameras Jason, years ago when Nan Clark and Sharon McGee climbed 73' up to the sheve house and took those birds eye photos of the yard it showed great panorama, but it was too high for much detail.

BTW, you are looking more Amish all the time with that beard. :-)
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm


Return to Work Session E (July 29-Aug 2)

Who is online

Users browsing this forum: No registered users and 0 guests