2019-06-21 Friday day 5 session C

[Sharon Evans]

I have nothing yet from Chama but here is a shot from Antonito sent my way.

6.19.19 Antonito with Linda Dueker and Ian Kelly. Linda ran the food service there. (1 of 1).jpg (88.26 KiB) Viewed 2148 times

.

[Sharon Evans]

Here are the Friday photos from Chama.

2019.06.21 The Friends are also responsible for upkeep of the line side mileposts and here is one ready (1 of 1).jpg (60.64 KiB) Viewed 2124 times

2019.06.21 Stock car 5674 is getting a new coat of paint (1 of 1).jpg (110.12 KiB) Viewed 2124 times

2019.06.21 Working under rider gon 1204 (1 of 1).jpg (96.27 KiB) Viewed 2124 times

2019.06.21 Touching up the paint on the new dorr to the paint car 3686 (1 of 1).jpg (77.97 KiB) Viewed 2123 times

2019.06.21 The crew from boxcar 5553 are painting small parts (1 of 1).jpg (87.72 KiB) Viewed 2123 times

2019.06.21 Looks like wood filler is being applied to an endsill on 5553 (1 of 1).jpg (69.84 KiB) Viewed 2123 times

2019.06.21 Attaching new side frame wood to 5553 (1 of 1).jpg (70.11 KiB) Viewed 2122 times

2019.06.21 Using the bigger hammer approach in straightening one of the door rails to 5553 (1 of 1).jpg (95.55 KiB) Viewed 2122 times

2019.06.21 The young member of the 5553 crew is carrying a piece of sheet metal (1 of 1).jpg (85.93 KiB) Viewed 2122 times

2019.06.21 One of the new door to 5553 is placed on the floor of the woodshop showing the outside hardware (1 of 1).jpg (84.54 KiB) Viewed 2122 times

2019.06.21 An inside view of the new door (1 of 1).jpg (63.19 KiB) Viewed 2122 times

2019.06.21 Working on cutting wood pieces for repair (1 of 1).jpg (82.8 KiB) Viewed 2122 times

2019.06.21 Using the belt sander to get the new door ready to paint (1 of 1).jpg (57.42 KiB) Viewed 2122 times

.

[Sharon Evans]

A few more from Friday were forwarded to me by John Cole all taken by Don Atkinson.

2019.06.21 The stenciling crew is hard at work (1 of 1).jpg (119.02 KiB) Viewed 2070 times

2019.06.21 Putting the car number on the freshly painted side (1 of 1).jpg (83.86 KiB) Viewed 2070 times

2019.06.21 Getting a length of pipe cut to size (1 of 1).jpg (75.58 KiB) Viewed 2070 times

2019.06.21 The cut is done (1 of 1).jpg (113.25 KiB) Viewed 2070 times

2019.06.21 The work is moving ahead on stock car 5691 (1 of 1).jpg (115.41 KiB) Viewed 2070 times

.

[Sharon Evans]

Warren Ringer is sending me more shots from Antonito, will post once I process them.

2019.06.21 Fuzzy is working on getting rivits out of the coupler pocket (1 of 1).jpg (89.63 KiB) Viewed 2027 times

2019.06.21 Sparks fly as Fuzzy grinds on the rivits (1 of 1).jpg (91.73 KiB) Viewed 2027 times

2019.06.21 Using a hammer and punch to drive the rivit out (1 of 1).jpg (93.04 KiB) Viewed 2027 times

2019.06.21 The end result, a rivit is removed (1 of 1).jpg (87.05 KiB) Viewed 2027 times

2019.06.21 Moving wheels to track so they can be used next week (1 of 1).jpg (98.6 KiB) Viewed 2027 times

2019.06.21 The wheel now placed on the track (1 of 1).jpg (95.3 KiB) Viewed 2027 times

2019.06.21 Lift the truck frame to move it to the track (1 of 1).jpg (74.64 KiB) Viewed 2027 times

2019.06.21 The wheels and frame are ready to make a truck (1 of 1).jpg (87.97 KiB) Viewed 2027 times

.