Tuesday 7/25/17 Emuse

Discussion Pertaining to Work Session E - 2017

Tuesday 7/25/17 Emuse

Unread postby Sharon Evans » Tue Jul 25, 2017 1:20 pm

The work session today started out overcast with a high chance of rain most of the day. With this in mind, by 9:30 am the sun was shinning and it was getting warm. This lasted all morning and as we were going to lunch, the clouds started to roll back in and not long after we had begun eating the sky opened up and it was a gully washing downpour with thunder and lightening. No one was dry even under the tent covering that was over the tables in the lunch area. Work went on this morning and, once the rain stopped, this afternoon.

I spent most of the morning with the mechanical crew as they did air brake test on some of the cars in south yard. From being with them I have learned a little about air brakes and also now know the track numbering in south yard.
2017.0780.none.0725.002.see.jpg
An air compressor is a vital piece of equipment when testing air brakes

2017.0780.none.0725.003.see.jpg
This is the set up for testing with the air line coming into the actual testing rig that is hooked to the car's gladhand

2017.0780.none.0725.004.see.jpg
This is a close up view of the testing rig. The green valve is the "train line", the red one "emergency application" and the yellow "normal set", it has a needle valve to restrict flow out from it.

2017.0780.none.0725.005.see.jpg
Car's brake cylinder in the release position

2017.0780.none.0725.006.see.jpg
and in the full applied position

2017.0780.none.0725.007.see.jpg
The retainer valve on the older box cars was at the top of the ladder that went up to the brake wheel


Lunch today was the Frito pie with Frito dipping cups, chili, lettuce and cheese and you could add chopped tomatoes, green chilies, sour cream and onions
7-25-17 Frito pie for lunch.jpg


The conversion of the passenger box car back to a box car which contains benches and can be used in photo freights is coming along.
2017.1294.pbox202-boxcar3537.0725.008.see.jpg
One end is done as well as the west side as it sits. The other end, seen here, is just about finished and the other side will be done either this afternoon or in the morning
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Tuesday 7/25/17 Emuse

Unread postby Steve Ritchie » Tue Jul 25, 2017 3:17 pm

Thanks Sharon for the update and information about the air brakes, very educational. Great looking lunch by the way. Keep up the great work to you and all the volunteers.
Steve R.
Steve Ritchie
Engineer
Engineer
 
Posts: 247
Joined: Thu Jul 17, 2014 10:48 am
Location: Oklahoma City, Oklahoma

Re: Tuesday 7/25/17 Emuse

Unread postby Sharon Evans » Tue Aug 01, 2017 6:02 pm

Here are further shots from the conversion of passenger box 202 back to box car 3537.
2017.1294.p-box202-boxcar3537.0725.005.see.jpg
The crew is wrapping the car with waterproof sheathing before putting on the boards

2017.1294.pbox202-boxcar3537.0725.009.see.jpg
Randy and Robert are working in the corner and feeding the wrap behind the end boards prior to attaching the wrap on the right side of the car.

2017.1294.pbox202-boxcar3537.0725.011.see.jpg
Don Bayer, team leader is drilling holes to attach the door guide to the left side of the car

2017.1294.pbox202-boxcar3537.0725.012.see.jpg
The Ross brothers are reloading the nail gun to get ready to attach more exterior boards


Over on the MOW bunk car:
2017.1294.pbox202-boxcar3537.0725.008.see.jpg
Walter is on the roof getting ready to install the step boards

2017.1295.04258.0725.011.see.jpg
Tim is painting the roof walk boards

2017.1295.04258.0725.013.see.jpg
The crew is on the roof placing the roof walk boards before nailing them down
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA


Return to Work Session E (July 24-28)

Who is online

Users browsing this forum: No registered users and 0 guests