Page 1 of 1

7/8/2021

Unread postPosted: Thu Jul 08, 2021 7:14 am
by Jack Spencer
The third Engineer/Fireman school of 2021 starts today. 487 is at the pit so the students will get 484.
IMG_20210708_151307.jpg
IMG_20210708_151307.jpg (141 KiB) Viewed 2936 times
For some reason the cams have been playing up for me this morning so might not catch all the activity.

487 has steam to spare here, a true characteristic of this particular locomotive.
IMG_20210708_153532.jpg
IMG_20210708_153532.jpg (182.09 KiB) Viewed 2925 times
IMG_20210708_153548.jpg
IMG_20210708_153548.jpg (176.7 KiB) Viewed 2925 times
IMG_20210708_153559.jpg
IMG_20210708_153559.jpg (186.19 KiB) Viewed 2925 times

Re: 7/8/2021

Unread postPosted: Thu Jul 08, 2021 7:31 am
by Edward Morris
Was wondering whether anyone else was seeing cam issues.................it started with me when #487 came to the pit.

Re: 7/8/2021

Unread postPosted: Thu Jul 08, 2021 7:35 am
by Edward Morris
The cam's seem to have settled down...............#487 is now at the coal dock

Re: 7/8/2021

Unread postPosted: Thu Jul 08, 2021 7:37 am
by Jack Spencer
Edward Morris wrote:Was wondering whether anyone else was seeing cam issues.................it started with me when #487 came to the pit.

If you look at my post, you will find that I was having cam issues as well. Yes, they have settled down now, though the North cam often freezes on me.

Re: 7/8/2021

Unread postPosted: Thu Jul 08, 2021 9:02 am
by Jack Spencer
Currently, the cams are down once again. Likely no departure stills today.

Re: 7/8/2021

Unread postPosted: Thu Jul 08, 2021 11:02 am
by Edward Morris
Yes, cam's are still down at 2 PM EDT and since all three are affected, it's probably some kind of network problem.

Re: 7/8/2021

Unread postPosted: Fri Jul 09, 2021 1:00 pm
by Jason Rose
I'm looking into it.

Re: 7/8/2021

Unread postPosted: Fri Jul 09, 2021 1:04 pm
by Jason Rose
Cams are back.

Enjoy.

Re: 7/8/2021

Unread postPosted: Fri Jul 09, 2021 1:13 pm
by Edward Morris
Jason, you're unbelievable.............at 3:00 PM you say "you're looking at it" and at 3:04 PM the cam's are back.
Thank you Jason

Re: 7/8/2021

Unread postPosted: Fri Jul 09, 2021 1:19 pm
by Jason Rose
I can't claim credit for being awesome. The railroad unplugged them to save bandwidth during a peak period (but didn't tell me) and forgot to plug them back in.

It took less time to fix than for me to type this. :smiley16:


Though, it did take about 10 minutes of troubleshooting and contacting the railroad to figure out the issue.

Y'all have a great weekend.