08/02/2017 More Cyclone Separator Work

Tell us what interesting thing you saw on the web-cams.

08/02/2017 More Cyclone Separator Work

Unread postby Rick Calkins » Wed Aug 02, 2017 9:43 am

Erratum - Error - Goof

Many thanks to Sharon Evans for calling a cyclone separator a cyclone separator and not a dome. As you can see from her communication, she did not thump my dome hard at all.
As always, thanks for keeping me on track.
.
Cyclone Seperator.jpg
Cyclone Separator
Cyclone Seperator.jpg (59.93 KiB) Viewed 1935 times

.
Following a bit of online searching, it seems that the cyclone separator for sand works much like grain separators found in Kansas or the sawdust collectors found in many wood-shops. An excellent engineering discussion of the theory of cyclonic separation is found in this video. Apparently this process of separating for usable sand is done under pressure and also takes advantage of the force of gravity. As a result, the sand appears to be blown through and out of the hose leading to the storage container in the locomotive. This might explain why the "tank" requires pressure testing. What a neat idea, the final result is that the sand is cleaned and transported at the same time. This is better than throwing around 50 pound bags of sand and emptying them into the dome opening . Empty sand bags can be seen in the sand bunker next to the sand house.
.


.

.
For those wary of performing work at high places, then working on the cyclone separator and its platform is probably not for you and me. Yet this Friends Volunteer goes about his tasks without looking about or down below. He is too busy concentrating on the task at hand. The south facing camera, which is mounted on the tipple, is not PTZ controlled. Which means the direction the camera faces cannot be controlled remotely. Thus, we can see no more than this. I did learn from watching this video that physically sound knees are necessary, if you expect to work from a ladder any length of time.
.
.

.
The work of the volunteer crew of Friends is a never ending task. Here is some of that work,and more importantly some of those Friends. Click on this link:

.
http://www.coloradonewmexicosteamtrain.org/FriendsForum/viewtopic.php?f=149&t=4848

.
.
Work Session E.jpg
Work Session E.jpg (16.47 KiB) Viewed 1945 times



.

.
Fill up your tank with a front end loader? That's what they do daily at Cumbres-Toltec Railroad. Except in this case the tender is loaded with chunks of coal. Having taken on water, Locomotive 489 heads to the coal bin, where a front end loader adds three large scoops. The day is about to begin for riders on Train #216, with a stop for a great lunch at Osier.

.
.



Image

.
.
Last edited by Rick Calkins on Wed Aug 02, 2017 8:07 pm, edited 6 times in total.
Honored to have Friend's membership ranking of "Conductor."
User avatar
Rick Calkins
Engineer
Engineer
 
Posts: 432
Joined: Thu Sep 08, 2016 9:24 am

Re: 08/02/2017 489 Leaves Home

Unread postby Rick Calkins » Wed Aug 02, 2017 9:53 am



Locomotive #489 pulls out of the Chama Depot 7 minutes behind schedule. Train #216 consists of 8 cars. Volunteers and other workers stop to wave at passengers, who wave back.
.
.


Image

.
.
Honored to have Friend's membership ranking of "Conductor."
User avatar
Rick Calkins
Engineer
Engineer
 
Posts: 432
Joined: Thu Sep 08, 2016 9:24 am

Re: 08/02/2017 More Cyclone Separator Work

Unread postby John Cole » Wed Aug 02, 2017 8:17 pm

The really crazy ones were Sharon McGee and Nan Clarke who climbed up to the top of the coal tipple when John Sutkus was replacing all of the wood siding on the schieve house. (That is almost 70 feet up), just to take pictures of the Chama yard. Those two gals were fearless! It was those high ground views that gave us the idea of using the coal tipple as a yard cam location. Thanks to Jason, Steve, and John Engs as well as Dick Cowles who raised the money for the equipment it happened for all to enjoy.
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: 08/02/2017 More Cyclone Separator Work

Unread postby Rick Calkins » Thu Aug 03, 2017 10:43 am

John Cole wrote:The really crazy ones were Sharon McGee and Nan Clarke who climbed up to the top of the coal tipple when John Sutkus was replacing all of the wood siding on the schieve house. (That is almost 70 feet up), just to take pictures of the Chama yard. Those two gals were fearless! It was those high ground views that gave us the idea of using the coal tipple as a yard cam location. Thanks to Jason, Steve, and John Engs as well as Dick Cowles who raised the money for the equipment it happened for all to enjoy.

.
John, that's a wonderful comment. Thanks for sharing.
.
.


Image

.
.
Honored to have Friend's membership ranking of "Conductor."
User avatar
Rick Calkins
Engineer
Engineer
 
Posts: 432
Joined: Thu Sep 08, 2016 9:24 am

Re: 08/02/2017 More Cyclone Separator Work

Unread postby Sharon Evans » Thu Aug 03, 2017 2:06 pm

Rick, thanks for including the video on how the separator works. Great for all to understand the complicated working of such a simple thing.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA


Return to Web Cameras

Who is online

Users browsing this forum: No registered users and 103 guests