Work session F1 8/20/20 - 8/24/20

Work session F1 8/20/20 - 8/24/20

Unread postby Sharon Evans » Sun Aug 23, 2020 5:15 am

These photos of the work session were forwarded to my by Don Atkinson.
Sharon McGee and another work on chronicling (1 of 1).jpg
Sharon McGee and another work on chronicling

Touching up the lettering on the 5635 (1 of 1).jpg
Touching up the lettering on caboose 5635

Work continues on the new walkway from the depot to the CRF (1 of 1).jpg
Work continues on the new walkway from the depot to the CRF

Looks like he is working on a railbus (1 of 1).jpg
Looks like he is working on a railbus which is the MW02

Getting ready to do a brake test on that tank car (1 of 1).jpg
Getting ready to do a brake test on that tank car

OK, don't have a clue (1 of 1).jpg
OK, don't have a clue, though I do now with Tom's help. This is inside MW02

He maybe doing some burn work (1 of 1).jpg
He maybe doing some burn work

Working on one of the rebuilt trucks with its springs sitting by (1 of 1).jpg
Working on one of the rebuilt trucks with its springs sitting by

Using the shop press to compress the springs before installing (1 of 1).jpg
Using the shop press to compress the springs before installing

New decking being applied to flat car 6214 (1 of 1).jpg
New decking being applied to flat car 6214

Finish cuts on the new deck planking (1 of 1).jpg
Finish cuts on the new deck planking

A couple of happy Friends installing that new decking (1 of 1).jpg
A couple of happy Friends installing that new decking


.
Last edited by Sharon Evans on Fri Aug 28, 2020 10:41 am, edited 2 times in total.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Tom Casper » Sun Aug 23, 2020 12:54 pm

Sharon says,
"Looks like he is working on a railbus" yes it is MW02 that is in for a refresh.
"OK, don't have a clue" inside view of MW02

Tom C.
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 819
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Sharon Evans » Sun Aug 23, 2020 1:53 pm

Thanks Tom
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Tom Casper » Mon Aug 24, 2020 6:55 am

here is a pic of MW02 from Bill K.

Tom c.
Attachments
MW02.jpg
MW02.jpg (184.06 KiB) Viewed 4302 times
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 819
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Sharon Evans » Tue Aug 25, 2020 10:59 am

Don has sent additional photographs for this work session.
A good supply of nuts and bolts is always necessary (1 of 1).jpg
A good supply of nuts and bolts is always necessary

Cleaning up the area around the CRF (1 of 1).jpg
Cleaning up the area around the CRF

Continue to apply the new decking on flat car 6214 (1 of 1).jpg
Continue to apply the new decking on flat car 6214

One member of the kitchen crew gets lunch ready (1 of 1).jpg
One member of the kitchen crew gets lunch ready

Working on a saw inside the CRF (1 of 1).jpg
Working on a saw inside the CRF

Working on the inside of MW02 (1 of 1).jpg
Working on the inside of MW02

Painting the railing on caboose 5635 (1 of 1).jpg
Painting the railing on caboose 5635

Tacking down the siding of caboose 5635 (1 of 1).jpg
Tacking down the siding of caboose 5635




.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Work session F2

Unread postby Sharon Evans » Thu Aug 27, 2020 1:39 pm

Don sent me more photos which I now realize are for session F2.
Working on the outside of MW02 (1 of 1).jpg
Working on the outside of MW02

Another angle of the work being done on MW02 (1 of 1).jpg
Another angle of the work being done on MW02

Touch up painting on flat car 6214 (1 of 1).jpg
Touch up painting on flat car 6214

The wheel press gets work done on it. (1 of 1).jpg
The wheel press gets work done on it

Shot of the A end of caboose 0306 (1 of 1).jpg
Shot of the A end of caboose 0306 showing the fresh paint on the railings

Work being done with the shop drill press (1 of 1).jpg
Work being done with the shop drill press


..
Last edited by Sharon Evans on Fri Aug 28, 2020 10:42 am, edited 1 time in total.
Sharon Evans
Conductor
Conductor
 
Posts: 4904
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Bill Kepner » Thu Aug 27, 2020 3:14 pm

Tom keeps moving his hand and I can't hit it with the sledge.
Bill Kepner
Brakeman
Brakeman
 
Posts: 20
Joined: Tue Nov 29, 2011 8:36 am

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Fred L. Kuhns » Thu Aug 27, 2020 7:05 pm

Bill, It great to see you and Tom working together ( No hand injuries ) . The 6214 was in need of tender loving care. It also great to see how clean the area around the CRF and the new walkway.
Fred L. Kuhns
Head Brakeman
Head Brakeman
 
Posts: 54
Joined: Wed May 29, 2013 8:46 pm

Re: Work session F1 8/20/20 - 8/24/20

Unread postby Bill Kepner » Fri Aug 28, 2020 5:31 am

That's the problem. Too many cars need lots of TLC. 6214 will go back to the railroad, and get loaded with ties and be used sparingly for another 15 years. Then it will need another new deck and other repairs. There are maybe 6 cars in the 62xx class that will need the same during that time. Hopefully there will be another set of volunteers to do this. Hopefully they don't have to make the same mistakes again that we did.
Bill Kepner
Brakeman
Brakeman
 
Posts: 20
Joined: Tue Nov 29, 2011 8:36 am


Return to All 2020 Work Sessions Combined

Who is online

Users browsing this forum: No registered users and 10 guests