More photos from B (and A?)

Discussion Pertaining to Work Session B - 2018

More photos from B (and A?)

Unread postby Chris James » Fri Jun 01, 2018 7:24 pm

It's sometimes difficult to tell when the Chroniclers' photos were taken. Some of the camera metadata shows date, location, project; some shows the camera metadata and little else. So...Here are uploads from the last day or so. All (almost) are from Antonito where most the projects were centered, but there may also be a couple from Chama. Most are from the Session B Chroniclers, Tom Smith and Susan Templeton plus a couple from John Cole. Thanks, y'all. Don't panic! Sessions C and D are coming in June and the amazing work of the Friends will be showcased from both ends of the line.

So...onward into the coal smoke:

John "The Plumber with The Bowler" Stover locates the water line for the hose bib at the new CRF tool lean-to:
stover_plumbing.jpg



There are a lot of Friends who worked a zillion different project in Antonito and Chama. Here are a few of them:

antonito_paint1.jpg

antonito_paint2.jpg

flat6200-2.jpg

flat6200_crew.jpg

flatcar_crew.jpg

lettering highside.jpg

highside_letter2.jpg

caboose crew.jpg

crew@487.jpg

brush crew.jpg

trucks3.jpg

0579_crew.jpg


Here are a couple more from John from Friday, last day of B.
trucks-friday.jpg

brake-rigging.jpg

stover_and standpipe.jpg

lava-ladder.jpg
Chris James
Editor, C&TS Dispatch
Albuquerque, NM
User avatar
Chris James
Engineer
Engineer
 
Posts: 355
Joined: Tue Nov 29, 2011 10:01 am
Location: Sandia Park, NM

Re: More photos from B (and A?)

Unread postby John Cole » Mon Jun 04, 2018 10:47 am

Thanks for posting my photos Chris, the last few photos after the group photos of people with their projects is Roy, Wayne, Russ, and Roger working out a plan for the brake rigging on the wooden frame trucks that are going under the 053 Rotary Snowplow cook car. Once they got the first one put together, the other three went pretty fast.

John (the plumber) Stover dug out and re-connected the outside hose bib and it has already be put to good use. The last photo is what if left of the lava tank ladder. (Some assembly required.....)
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm


Return to Work Session B (May 28 - June 1)

Who is online

Users browsing this forum: No registered users and 6 guests