Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:32 pmGroup photo of volunteers who helped rebuild the tender for locomotive 463.
Friends of the Cumbres & Toltec - FriendsOfCumbresToltec.org
A Place for Those Born Too Late...
http://coloradonewmexicosteamtrain.org/FriendsForum/
Tender work session Antonito Nov 4, 2011
http://coloradonewmexicosteamtrain.org/FriendsForum/viewtopic.php?f=10&t=95
Page 1 of 1
Posted: Fri Nov 25, 2011 2:32 pmRe: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:35 pmEnd of tender nearest locomotive before wood replacement.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:38 pmSomeone who's usually never in the photos since he's taking photos as Chronicler, Tim Smith.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:42 pmOld wood taken off frame.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:47 pmView of tender from the top. Notice the two metal rods appx 1" in the center. These rods are what carries the tension from the locomotive through the tender. This way the frame avoids undue tension and stress.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 2:50 pmEnd view of the rods. When you ride behind the rebuilt 463, these rods are what carries the pull of the locomotive through the tender to the coupler.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 3:03 pmNew white oak end sill installed.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Nov 25, 2011 3:05 pmHardware being installed.
Re: Tender work session Antonito Nov 4, 2011
Posted: Thu Dec 08, 2011 9:58 pmLooks like the correctly figured out that the steps marked "E" belong on the engineer's side of the tender.
Re: Tender work session Antonito Nov 4, 2011
Posted: Fri Dec 09, 2011 7:12 amThat was a very clever system, huh :)